I didn't have a lot of time to work on the cabinet this weekend due to an impromptu trip to Oklahoma to see my folks, but I did manage to get some things done. I finished the initial sanding and started applying the primer, installed a new marquee light, and reworked the wiring harness. The 12v power supply is gone - since the new light uses 110v AC, I'm pretty confident that I can run the coin door lamp on the 12v line from the motherboard power supply. I also used some spare molex connectors from old pc parts to make a wiring harness for the coin door. I had to be diligent in labeling the lines, since the coin door uses yellow/black for the coin switch wiring, and the power supply uses yellow/black for 12v DC :) I just connected the yellow/black at the PS end to red/black in my harness by swapping the yellow and red pins in the molex connector, and labeled them accordingly - the molex connector will make sure I don't put 12v where doesn't belong :)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment